Laboratory furniture, laboratory benches, Kitlab®

Supplier: Modulab
132-7745EA 662 EUR
132-7755 132-7876 132-7875 132-7754 132-7757 132-7756 132-7877 132-7751 132-7750 132-7874 132-7753 132-7752 132-7873 132-7748 132-7747 132-7749 132-7766 132-7765 132-7768 132-7767 132-7762 132-7761 132-7764 132-7763 132-7760 132-7759 132-7758 132-7729 132-7726 132-7725 132-7728 132-7727 132-7864 132-7746 132-7745 132-7860 132-7863 132-7862 132-7858 132-7859 132-7711 132-7710 132-7713 132-7712 132-7794 132-7830 132-7791 132-7790 132-7793 132-7792 132-7708 132-7829 132-7828 132-7707 132-7709 132-7703 132-7706 132-7827 132-7705 132-7722 132-7721 132-7724 132-7723 132-7720 132-7840 132-7719 132-7718 132-7839 132-7715 132-7836 132-7714 132-7717 132-7838 132-7716 132-7837 132-7777 132-7776 132-7779 132-7778 132-7773 132-7772 132-7775 132-7774 132-7771 132-7770 132-7769 132-7700 132-7788 132-7787 132-7702 132-7789 132-7701 132-7784 132-7783 132-7786 132-7785 132-7780 132-7782 132-7781
Laboratory furniture, laboratory benches, Kitlab®
Furniture Tables and Workbenches
Frame:
30×30-mm metal base frame, protected by a white baked epoxy resin, fitted with level adjustment gas lift columns
Rear strip and a fluid back panel, with water resistant melamine on both sides, with all borders veneered
Metallic tube stop bar protected by a white epoxy resin

Front strip:
Laminate Oslo blue (on request: white, yellow, broom or grey)

Worktop with five possible surfaces:
White 12/10 post-formed laminate on the front edge
Trespa® Athlon® resin (thickness: 8 mm) on chipboard support (thickness: 22 mm), white surface and a PVC border
Stoneware slab (thickness: 8 mm) on a water-resistant support (thickness: 22 mm) with a PVC border
Tempered unleaded enamelled glass — 'ice' colour — with a thickness of 6 mm on a water resistant chipboard support (thickness: 22 mm), a white PVC border (thickness: 4 mm), flexible seal between the glass and the support

Bare benches (composition):
1 fluid back panel
2 metal legs
1 dry worktop
1 laminate front strip
1 rear strip
1 stop bar
2 or 3 extensions for 750 mm deep benches with 600 mm legs
The 750 mm deep bench is equipped as standard with a 600 mm base, which cannot accommodate a splashback shelf. To add a splashback shelf, a 750 mm base is required.

Dry benches with splashback shelf (composition):
1 fluid back panel
2 metal legs
1 dry worktop
1 laminate front strip
1 rear strip
1 splashback, water resistant melamine on both sides, on a high density chipboard support, which can accommodate plumbing fixtures and electrical sockets
2 or 3 veneer shelf supports
1 white, water resistant melamine shelf on two sides, Oslo blue borders, 160 mm width (10 mm front edge)
1 metallic stop bar

Certifications: Conforms to the AFNOR 15201 standard.

Delivery information: Supplied as a ready-to-assemble, flat-pack kit. The mounting fittings as well as the delivery fittings are automatically provided for all standard benches.
Order Now

Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Plus About VWR