Supplier: LABCONCO

Fast-Freeze® flasks for FreeZone® freeze dry systems are designed to be easier to handle, faster to load, and more convenient to use in the laboratory for freeze drying.

Supplier: LABCONCO

Basic Laboratory Hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Constructed of epoxy-coated steel, Basic Hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles.

Supplier: LABCONCO

Oval cupsink, PP, 1,5” NPSM thread, mounts in work surface with cupsink cutout, 76×152 mm

Supplier: LABCONCO

8-port manifold, W×D×H: 218×218×399 mm

Supplier: LABCONCO

Scroll Vacuum Pumps are low maintenence, corrosion resistent pumps that require no oil.

Supplier: LABCONCO

Kjeldahl distillation units are designed with mounting on a base cabinet or table. One-piece borosilicate glass connecting bulbs separate liquid from vapors prior to the vapors entering the condenser and effectively traps caustic mist that may carry over to the recovery solution and One-piece borosilicate glass delivery tubes with long necks, round bottoms and thick walls to help eliminate pressure fluctuations in the distillation phase.

Supplier: LABCONCO

Purifier Logic+ Class II Type A2 Biosafety Cabinets are suitable for work with agents that require Biosafety Level 1, 2 or 3 containment.

Supplier: LABCONCO

Produce up to 350 liters per minute of pure nitrogen.

Supplier: LABCONCO

Weathercaps are constructed of strong, corrosion-resistant PVC.

Supplier: LABCONCO

Protector premier hoods are suitable for general chemistry applications and also explosion-proof models are available for laboratories with potentially explosive/flammable atmospheres. Hoods are available with a built-in standard fiberglass blower, or an explosion-proof fiberglass blower, or without a blower (remote blower sold separately).

Supplier: LABCONCO

This combination glove box with fibreglass lining provides inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment.

Supplier: LABCONCO

The CentriVap micro IR vacuum concentrator has a very small footprint and therefore fits in tight spaces. It is ideal for small samples such as DNA and small throughput in molecular biology, proteomics, genomics, genetics, cell biology and drug discovery labs.

Supplier: LABCONCO

Safely transports heavy instruments and bulky equipment. Holds up to 181 kg. Welded frame is constructed of rugged, 18-gauge glacier white epoxy-coated 2,5 cm square tubular steel.

Supplier: LABCONCO

These systems use vacuum along with heat and vortex motion to help speed evaporation and provide an alternative to traditional centrifugal evaporation methods. The systems may be used with a broad range of aggressive chemicals. Heat is supplied by a dry block heating system that, unlike water baths, adds no potential source of contamination and requires no maintenance.

Supplier: LABCONCO

Vacuum diaphragm pump, Vacuum controller

Supplier: LABCONCO

Heated product shelf chambers with valves.

Supplier: LABCONCO

Accessory for Freeze Dryer

Supplier: LABCONCO

PuriCare Procedure Stations with a large sash opening create a particulate-free environment for small animal research activities such as cage changing, weighing, anesthesia delivery and surgical procedures.

Supplier: LABCONCO

Evaporator, centrifugal, Glassware caps, PTFE, for 600 ml tubes

Supplier: LABCONCO

An efficient, automatic evaporator system which can be used with a broad range of aggressive chemicals. In RapidVap N₂ systems, a stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow-down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 or all 8 tube locations. Vortex motion and dry heat may also be applied to further accelerate processing.

Supplier: LABCONCO

Combine the separate concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 17 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump - the only additional component necessary to begin processing.

Supplier: LABCONCO

Benchtop freeze drying system, type 304 stainless steel with 12 ports, -75 °C. Ideal for the laboratory with occasional lyophilisation requirements, the Dry Ice Benchtop Freeze Dry System provides a simple, economical means of freeze-drying. It is equipped with a center well for dry ice and solvent that serves as a water vapour collector and doubles as a convenient pre-freezing bath. Flasks, serum bottles and ampules may be frozen by dipping and rotating them in the well. Chamber size 248 x222 mm

Supplier: LABCONCO

Purifier® Logic®+ type B2 biosafety cabinets combine ergonomics, comfort and safety.

Supplier: LABCONCO

Retaining rings, stainless steel 304, 292 mm ID

Supplier: LABCONCO

These FreeZone® small tray dryers provide precise control and program flexibility for consistent performance and are designed for lyophilising small to moderate bulk sample loads or numerous sample batches.

Supplier: LABCONCO

Accessory for Freeze Dryer

Supplier: LABCONCO

For use with Basic™ 47, Basic 70, Fiberglass 30, Protector® XStream®, Protector Premier™, Protector ClassMate®, Protector PVC perchloric acid, protector stainless steel perchloric acid, logic+, logic, cell logic, puriCare procedure stations and protector radioisotope laboratory hoods.

Supplier: LABCONCO

Purifier Logic+ Type A2 biosafety cabinets combine ergonomics, comfort and safety.

Supplier: LABCONCO

These cabinets support fume hoods and safely store and vent acids and also other corrosive liquids.

Supplier: LABCONCO

FlaskScrubber glassware washers are designed to wash and dry narrow-neck and general purpose labware. They have a lower spindle rack that holds up to 36 pieces of primarily narrow-neck glassware such as volumetric flasks. Water and detergent are pumped through the spindles to reach the innermost areas of your glassware. Forced air drying through the spindles ensures thorough drying inside and out. Specialized inserts for pipets, BOD bottles, petri dishes, culture tubes and small utensils enhance the FlaskScrubber's versatility. The washer may be outfitted with an upper standard or spindle rack to increase capacity. FlaskScrubber is a viable option for cleaning and reuse of glassware used for trace metal, volatile organic and semi-volatile organic compounds.